18 In 450MM Adjustable Stroke Industrial Linear Actuator with NC Magnetic Reed Switch (Model 0041534-4)

18 In 450MM Adjustable Stroke Industrial Linear Actuator with NC Magnetic Reed Switch (Model 0041534-4)This is an adjustable stroke industrial linear actuator with a standard stroke of 450mm. It is equipped with two external normally closed magnetic switches that can slide freely. By adjusting the positions of these two normally closed magnetic switches, the linear actuator can be controlled to work within the set stroke length. For example, for a linear actuator with a stroke of 450mm, you can set it to move within a stroke range of 50mm to 430mm. Key

you can connect three manual switches to wired control terminals <S1>

Channel / Button: 12

The rear connector style of linear actuator C can be customized: the default is an open hole connector

2) Connect terminals “A1” and “B1” to motor 1

Other 3 terminals stop outputting

each limit switch has two normally open terminals

High Power: Each channel can work at maximum current 30A

4) Connecting two wires of a magnetic switch to two terminals <Magnetic Switch 1> of the magnetic switch controller and connect two wires of another magnetic switch to two terminals < Magnetic Switch 2> of the magnetic switch controller

This is a 800 mm heavy-duty electric linear actuator with a built-in potentiometer and a thrust of up to 5000 N

you can connect three manual switches to wired control terminals <STOP>

It can operate three electric linear actuators C / F to run completely synchronously

How to use the hand controller to control linear actuator