2000N Adjustable Stroke Linear Actuator with NC Magnetic Reed Switch 32 Inch 800MM Stroke (Model 0041508-4)

2000N Adjustable Stroke Linear Actuator with NC Magnetic Reed Switch 32 Inch 800MM Stroke (Model 0041508-4)This is a micro industrial linear actuator with an adjustable stroke and a standard stroke of 800 mm. It is equipped with two external normally closed magnetic switches that can slide freely, and by adjusting the position of these two normally closed magnetic switches, the linear actuator can be controlled to work within the set stroke length. For example, for a linear actuator with a stroke of 800 mm, you can set it to move within a stroke range of

All linear actuators must be connected to the synchronous controller for the system to function properly

We can also customize linear actuators with stroke lengths in the range of 0-200mm according to your stroke length requirements

and no power supply is required

Modulation Mode: FSK + LORA

This industrial electric linear actuator with a 800mm stroke boasts a powerful torque of up to 6000 N

for a linear actuator with a stroke of 1000 mm

2) Press and hold the button <DOWN> on the transmitter: DC motor rotates in reversal direction

resulting in a retraction length of 480 mm

Connect the positive pole of DC power supply to the terminal <+> of the controller

then reset the system

Release the button 2: Motor or linear actuator stops

delay control and automatic cycle control